Publicidad
56
e Store cassettes in their cases and keep them
in an upright position to prevent intrusion of
dust and uneven winding.
¢ When the unit will not be used for a long
period of time:
—periodically turn on the power, operate the
camera section and recorder section and play
back a tape for about three minutes.
Clean the lens and the infrared beam
tansmitter/detector, with a soft brush to
remove dust. If there are fingerprints on therm,
remove them with a soft cloth. Clean the
recorder body with a dry, soft cloth, or a soft
cloth fightly molstened with a mild detergent
solution. Do not use any type of solvent which
may damage the finish.
For protection, keep the lens cap on the jens
when not using the camera.
Publicidad
