Publicidad
[A-T]
Built-in microphone
[2] White balance sensor
This is the sensor for auto white balance
adjustment.
Accessory shoe
Attach an optional external microphone or
video light here.
[4] POWER switch
CAMERA: For camera recording
PLAYER: For playing back or editing tapes
OFF: Power off
[5] Viewfinder *
The picture being recorded or played back
can be monitored in monochrome here. Also,
data such as caution indicators and function
mode are displayed on the viewfinder screen.
On the bottom
< : Brightness control screw
[><]: Focus control screw
Normally, there is no need to adjust these
screws. Adjust only when the picture is not
displayed clearly.
[6] Battery compartment
Infrared beam detector
The infrared beam reflected from the object
to be shot is received here during auto
focusing.
Infrared beam emitter
Transmits an infrared beam toward the object
to be shot during auto focusing. Do not look
into it for a long time when recording with
auto focusing.
[9] BACK LIGHT button [36]
Tripod receptacle
Attach an optional tripod.
* The eyecup is attached for the right eye. For the
left eye, detach the rubber eyecup and attach it as
illustrated.
Publicidad
