Publicidad
Idiomas disponibles
Idiomas disponibles
7. THERMOREGULATOR "SMART MT"
SMART-MT is the controller for the integrated management of the heat pump and the thermal system. Below are the main features of the same and the
methods of access to the individual parameters.
They allow the customisation of the operation with different types of systems and/or use of the system. This regulator is positioned in the heat pump, under
the side cover for access to the electrical connections of the same.
Up button
Down key
7.1 Display and keys
Visualisation on the Display
- When switched on it shows in sequence: Software version,
PdC size and Recipe.
- If Remote On/Off = contact open:Displays the message OFF
- In normal operation it displays:
Clock, Water Outlet Temp or Compressor Step
Warning status active (alarm)
Heating operation, thermostat not in call
Cooling operation, thermostat not in call
MIRAI-SMI-F Stand-by
Defrosting
Eco in solar tracking operation
N° 1
Consent to MIRAI-SMI circulator
N° 2
Consent to dehumidifier
N° 3
Production of domestic hot water (DHW)
N° 4
Electric heater running as DHW addition
N° 5
Auxiliary heater consent
N° 6
Frost protection 1 in operation
N° 7
Consent to second set point
Clock setting
No. 1
No. 3
No. 5
No. 7
No. 2
No. 4
No. 6
Fixed turning on
Display
ESC key
Set key
Intermittent turning on
-
-
Heating operation, thermostat on call
Cooling operation, thermostat on call
-
-
Limitazione frequenza compressore da ingresso 103 (F+/F-)
Consent to relaunch circulator
-
-
-
-
Frost protection 2 in operation
-
-
EN
EN
115
Publicidad
