emmeti MIRAI - SMI 4.0 Manual De Instrucciones página 91

5. INSTALLATION 1. DESCRIZIONE DEI COMPONENTI
5.1 Minimum spaces for installation
For all models.
Ensure compliance with the minimum spaces for installation.
5.2 Fixing
Fix the unit securely with the bolts (Ø 10 mm)
• drowned in the base
• to the antivibration supports resting on the ground
• to the fixing brackets in suspension
If the unit is installed in areas subject to heavy snowfall it will be neces-
sary to raise the unit to at least 200 mm above the normal level reached by
the snow or alternatively use the suspension bracket for the outdoor unit.
Ensure that excessive snowfall
does not obstruct the normal air
flow of the unit.
5.3 Condensate Drainage Pipes
• If you use an L-shaped fitting, secure it as shown here.
• Make sure that the piping allows the proper flow of water even
at temperatures below zero degrees.
EN EN
Hose pipe
Exhaust elbow
91