CAMPAGNOLA KRONOS 58 Manual De Uso Y Mantenimiento página 31

1.
INTRODUCTION
1.1. Functions and use of the Use and Maintenance Manual
Before working on the machine, carefully read and understand this Use and Maintenance Manual in full in order
to safeguard the operator and to avoid damaging the machine. These instructions describe how to operate the
product safely, economically and in compliance with the current safety regulations. Following these instructions
helps avoid dangerous situations, reduces repair costs and down-time of the product and extends the life-span of
the product itself. This manual must be intact and legible in its entirety. Every operator involved in using the product
or in charge of maintenance must know the location of this manual and be able to read it whenever needed.
The manufacturer declines all liability for production faults and for damage caused by the product to property,
persons and animals in the following cases:

Misuse of the product for purposes and/or functionality other than that for which it was built;

Non-compliance with the requirements set out in this manual;

Use under environmental operating conditions other than those specified in this manual;

Non-compliance with assembly conditions/prescriptions;

Insufficient or deficient periodic maintenance;

Modifications or interventions not agreed upon and authorised by the manufacturer;

Use of non-original or non-model-specific spare parts;

Use in enclosed spaces;

Use near overhead power lines;

Use by persons under 16 years of age or over 80 years of age or with physical limitations;

Use by unsuitable, unauthorised, untrained personnel;

Use by supervisory personnel who are not adequately trained and informed as required by Italian Legis-
lative Decree 81/2008 et seq. (Directive 89/391/EC or Directive 2009/104/EC) on workplace safety;

Use that does not comply with the laws on machine safety and/or the safety regulations of the specific
European and/or national legislation in force in the workplace;

Total or partial non-compliance with these instructions and/or the prohibition and prescription notes in this
manual;

Exceptional events;
The user/employer's personnel are responsible for the application of the safety requirements set out below and
the intended activities, and they must ensure that the personnel authorised to operate, maintain, etc.:

are qualified to perform the required activity;

are trained, informed and instructed in the use of the product and to carry out maintenance activities;

know and scrupulously observe the requirements contained in this document;

know and apply the general and specific safety regulations applicable to the machine.
It is a mandatory requirement that all user/employer personnel, and in particular the technical maintenance
personnel, have read and understood this manual, are familiar with and have the basic principles of mechanics,
electricity and are skilled in the use of such products/machinery.
Failure to observe the safety regulations and the instructions given therein may result in injury to property and
persons as well as damage to the machine's components and control unit.
A reading of this manual, although exhaustive, can under no circumstances replace adequate experience of the
personnel in charge and authorised to operate and maintain the machine.
The user may, at any time, contact the manufacturer to request further information in addition to that contained
herein, as well as to submit proposals for improvement.
PROHIBITION OF MODIFICATIONS
It is forbidden to carry out any modification work on the machine, and in particular it is forbidden to carry out
modifications that may reduce the safety of the machine. In particular, it is forbidden to remove or modify guards
and/or safety and/or signalling and/or control systems provided by the Manufacturer.
0310.0360 Use and Maintenance Manual - Translation
of Original Instructions - Rev: 00, Date 07/02/2024
Page 31