Publicidad
Idiomas disponibles
Idiomas disponibles
The machine's plate is placed on the machine as indicated in the following figure.
3.2.
Product description
The chain pruner is a tool used for cutting and pruning orchards, vineyards, citrus and olive trees and all trees in
general. The tool must be powered by a power source (battery pack) having the technical features listed in para-
graph 3.7, inserted in the specific battery holder backpack, if any, which must only be worn by the user personnel
when using the tool.
The tool is made up as follows:
-
a power unit with ergonomic handle (1);
-
fixed extension pole (23);
-
cutting head with 7" bar (15);
-
chain (16) 1/4".
The power unit comprises the ergonomic handle (1), the control keypad (4), the circuit board and the brushless
motor.
The control keypad (4) manages the functions of the tool, specifically:
-
an ON/OFF switch (5) to switch the tool on and off;
-
the selectors (6) for speed selection (increase/decrease);
-
the LED (12) signals the power-on status of the tool.
The power cable (13) is permanently installed on the handle, enabling the connection of the tool with the battery
pack via the connector (9).
3.3.
Intended use
This machine may only be used for the purposes expressly intended by the manufacturer and indicated in para-
graph 2.2.1.
CAUTION!
•
Any other use has to be considered improper and potentially dangerous for the operators' safety.
This would make any warranty claims void.
•
If the tool is used for purposes other than those listed, it may be seriously damaged and cause damage
to property and persons.
Any other use, or the extension of the use beyond that intended, is prohibited and does not correspond
to the intended purpose of the manufacturer, and therefore the manufacturer cannot accept any liability
for any resulting damage.
Ways of use specified in the manual as incorrect must never be permitted under any circumstances.
Improper use of the machine and lack of maintenance can lead to serious danger to personnel.
The actions described in this manual as forbidden and not permitted, which obviously cannot cover the whole
range of potential possibilities for "non-permitted use" of the machine, are however the most "reasonably" foresee-
able ones and are to be considered absolutely forbidden.
0310.0360 Use and Maintenance Manual - Translation
of Original Instructions - Rev: 00, Date 07/02/2024
Page 39
Publicidad
