Note!
To reach the maximal angle position, the Elevating Swivel Unit
should be mounted as close to the rear of the channel forearm
pad as possible.
4.1 Adjustment
The Elevating Swivel Unit and channel forearm pad should be adjusted so
that the forearms rest comfortably on the pad. If the channel forearm pad
is too far forward, the user's forearms will not rest flat on the pad. If it is
too far back, the shoulders will be hunched. If the Swivel Unit is too close
to or too far from the patient's body, install the Offset Plate (436H1=7)
as shown in Figure 11. The plate can be mounted in two orientations de-
pending on positioning requirement.
11
Ottobock | 33