Opening The Enclosures; Ind131 Din And Ind331 Panel-Mount - Mettler Toledo IND131 Guia De Instalacion

2.1.

Opening the Enclosures

Procedures for opening the various configurations of the IND131 and IND331 terminals differ, and
are shown in the following sections.
2.1.1.

IND131 DIN and IND331 Panel-mount

The front of the DIN enclosure is attached to the rear housing by two snap in place tabs. Both tabs
must be released simultaneously before the front can be slid out of the housing.
2-2 METTLER TOLEDO IND131/IND131x/IND331/IND331xx Installation Manual
Figure 2-1: Opening the DIN and Panel-mount Enclosures
64067480 | 11 | 05/2018