Retrieving Genset Display Values - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

SMA Solar Technology AG
Position Display group
D Irradiation and temper-
ature sensors
E Storage system
F Gensets
G PV power plant
Procedure:
1. To do this you must be logged in as Installer: Go to the menu Plant Overview via the page and menu selection.
2. Choose Stations > General Overview via the page and menu selection.
6.2

Retrieving Genset Display Values

The Generator system overview page contains the display values for all of the gensets in the PV diesel hybrid
system. The genset names are assigned during commissioning.
User Manual
Display value Description
Ambient temp. Ambient temperature in °C
Module temp. Temperature of the PV modules in °C
Global irradiation PV solar irradiation in W/m
Power MPP Active power output at the maximum power point
Active Power Current active power of the storage system in kW
Reactive power Current reactive power of the storage system in kVAr
Total energy Energy of the storage system fed into the hybrid grid
in MWh
Active Power setpoint Current setpoint for the active power of the storage
system in kW
Reactive power setpoint Current setpoint for the reactive power of the stor-
age system in kVAr
Active power Current active power of the gensets in kW
Reactive power Current reactive power of the gensets in kvar
Total energy Genset energy fed into the hybrid grid in MWh
Reserve power setpoint Setpoint for the reserve power of the gensets
Active power Current active power of the PV power plant in kW
Reactive power Current reactive power of the PV power plant in kvar
Total energy PV power plant energy fed into the hybrid grid in
MWh
Active power setpoint Setpoint for the active power of the PV power plant
Reactive power setpoint Setpoint for the reactive power of the PV power
plant
6 System Monitoring
2
FSC20-BA-xx-20 27