Structure; Key Switch; Light Repeaters - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

SMA Solar Technology AG
During commissioning of the Fuel Save Controller, the user has the possibility to activate various functions for stable
and reliable operation such as minimum genset loading and power control range. In addition, it is possible to remotely
monitor all relevant measurement data, process data and the current system status by means of SCADA or a web-
based interface.
3.2

Structure

Figure 2: Fuel Save Controller
Position
A
B
C
3.3

Key Switch

Position Description
Start The Fuel Save Controller can be started via the Start position.
Before the Fuel Save Controller can be stopped, ensure that the the current reserve power of
Stop
the gensets is sufficient for supplying the power required by the loads. Genset overload may
result in destruction of the gensets (see Section 10.1 "Stopping the SMA Fuel Save Controller
and PV Power Plant", page 99).
The Fuel Save Controller can be stopped Stopposition.
3.4

Light Repeaters

The Operation und Warning light repeaters indicate the current status of the Fuel Save Controller.
User Manual
A
F U E L
S A V E
C O N
T R O L
Designation
Key switch
Operation light repeater
Warning light repeater
B
C
L E R
3 Product Description
FSC20-BA-xx-20 11