SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso página 72

8 System Control
Parameter Description
Enable Activate the Reverse Power
Protection function.
ErrTolDevMinPc Tolerance for error detection
upon device reverse power in %
of the nominal active genset
power in kW
ErrTolDevMinTm Timer for error output upon de-
vice reverse power in seconds.
WarTolDevMinPc Tolerance for warning detection
upon device reverse power in %
of the nominal active genset
power in kW
WarTolDevMinTm Timer for warning output upon
device reverse power in seconds
ErrTolTotPc Tolerance for error detection
upon total reverse power in % of
the nominal active genset power
in kW
ErrTolTotTm Timer for error output upon total
reverse power in seconds
WarTolTotPc Tolerance for warning detection
upon total reverse power in % of
the nominal active genset power
in kW
WarTolTotTm Timer for warning output upon to-
tal reverse power in seconds
Requirement:
☐ You must be logged in as Installer.
72 FSC20-BA-xx-20
Value Explanation
Yes Activates the function Yes
No Deactivates the func-
tion
-100% to +100 –
0.1 s to 60 s –
-100% to +100 –
0.1 s to 60 s –
-100% to +100 –
0.1 s to 60 s –
-100% to +100 –
0.1 s to 60 s –
SMA Solar Technology AG
Default
value
-5 %
0.1 s
5 %
2 s
-5 %
0.1 s
5 %
2 s
User Manual