Retrieving Display Values From Measurement Devices - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

SMA Solar Technology AG
Display value Description
BSC operation mode Operating mode of the Battery
status System Controller
The Battery System Controller is
the communication interface of
the battery inverter to the Battery
Management System and the
Fuel Save Controller.
Device status Status of the battery inverter
Device error code Storage system error
6.5

Retrieving Display Values from Measurement Devices

The values obtained from the measurement modules of the Fuel Save Controller are displayed on the Measurement
system overview page.
User Manual
Value Explanation
STOP The storage system is switched
off.
WAIT The storage system is verifying its
connection conditions.
PQ The storage system is connected
and is processing the active and
reactive power setpoints.
FAILURE An error has occurred in the stor-
age system.
UNKNOWN The status of the storage system
cannot be read.
STOP The battery inverter is switched
off.
IN OPERATION The battery inverter is feeding in.
ERROR An error has occurred in the bat-
tery inverter.
WAIT The battery inverter is waiting for
setpoints.
WARNING A warning has occurred in the
battery inverter.
COM ERROR An error has occurred in the com-
munication between the battery
inverter and the Fuel Save Con-
troller.
For information on potential causes or corrective mea-
sures, see the documentation for the battery inverter
6 System Monitoring
FSC20-BA-xx-20 33