Setting The System Time - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

SMA Solar Technology AG
3. In the Select language drop-down list, select the desired language.
4. If you are logged in as User, proceed as follows:
5. Select the [Apply] button.
5.4

Setting the System Time

Figure 8: SNTP Settings: System time settings
Parameter Description
Use SNTP client Activates the automatic synchronization of the system time over the
Internet with SNTP (Simple Network Time Protocol)
UTC time zone offset Deviation in hours from UTC (Coordinated Universal Time)
This parameter must be set according to the time zone applicable at
the installation site.
Date Manual date input in yyyy-mm-dd format
Time Manual time input in hh-mm-ss format
Address of SNTP Internet address of an SNTP server
server
User Manual
5 Getting Started
Value
–
-12 to +14
–
–
–
FSC20-BA-xx-20 23