Parameters For Gensets With Genset Controller Easygen-3000 Via The Esenet Gateway - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

SMA Solar Technology AG
7.2.3 Parameters for Gensets with Genset Controller easYgen-3000 via the
ESENET Gateway
Genset general configuration
Parameter Description
Remaining Remaining number of con-
available de- figurable gensets
vices
Number of de- Number of installed
vices gensets
Genset inter- Type of genset interface
face Type
CAN#1 pass- Password for write access
word to the genset controller
Genset setpoint Activates the writing of re-
mechanism serve power setpoints to
the genset controller system
(see Section 8.1.1,
page 70).
Parameter com- Compares the nominal
pare mecha- power values of the
nism gensets set in the Fuel Save
Controller with those of the
genset controllers
* For settings regarding the genset controller, see technical information "Gensets in PV Diesel Hybrid Systems with
SMA Fuel Save Controller 2.0"
Generator configuration wizard: detailed configuration
Parameter Description
Alias Genset / genset controller ID
Enable this gen- Determines whether the
erator Fuel Save Controller should take
the genset into account for con-
trol of the PV diesel hybrid system
Nominal active Nominal power of the genset
power
User Manual
Value Explanation
– –
0 to 8 –
Easygen 3000 ES- Genset controller "Woodward
ENET-Gateway Easygen 3000" with Modbus/
TCP communication via the ES-
ENET gateway *
0 to 9999 For setting the password, refer to
manufacturer documentation
Checkbox activated The specification of setpoints for
the reserve power is activated.
Checkbox deacti- The specification of setpoints for
vated the reserve power is deactivated.
Checkbox activated Comparison of genset nominal
power is activated
Checkbox deacti- Comparison of genset nominal
vated power is deactivated
Value
–
Yes
No
0 kW to 10000 kW
7 System Settings
Explanation
–
The Fuel Save Controller
takes the genset into ac-
count.
The Fuel Save Controller
does not take the genset
into account.
–
FSC20-BA-xx-20
Default
value
–
0
None
0
Deacti-
vated
Deacti-
vated
Default
value
–
No
0 kW
47