Buttons In The Header - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

4 User Interface
Position Designation
C Status bar
D Page and menu
selection
4.5

Buttons in the header

Symbol Designation
Home
Return
Plant*
Wizard*
Control *
16 FSC20-BA-xx-20
Explanation
Displays the following information:
• Graphical display of the operating state
(see Section 3.4 "Light Repeaters", page 11)
• Status: Operating state of the Fuel Save Controller:
– BOOT: Fuel Save Controller is starting.
– INIT: Fuel Save Controller is establishing communication with the other
devices in the PV diesel hybrid system.
– STANDBY: Fuel Save Controller is in standby mode.
– MANUAL: Fuel Save Controller is in manual mode. The setpoint values for
the active and reactive power of the PV power plant are set via the user
interface.
– OPERATE: Fuel Save Controller is in automatic mode and specifies the
setpoints for the active and reactive power of the PV power plant. If the
Fuel Save Controller is connected to a SCADA system, it will use the setpoints
from the SCADA system in automatic mode.
– SAFETY: The Fuel Save Controller has switched to a safe state following an
error. The PV power can be reduced compared with operation in automatic
mode.
– ERROR: There is an error in the Fuel Save Controller. Automatic operation of
the PV diesel hybrid system is interrupted.
• Access level: User group that you are logged in with
• Software version: Current software version of the Fuel Save Controller
• Date and location
Access to the various pages and menus of the user interface
Description
Use this symbol to access the home page.
Use this symbol to go back to the previous page.
Use this symbol to call up the Hybrid Plant Overview page. The Hy-
brid Plant Overview page shows an overview of the display values for the PV
diesel hybrid system (see Section 6.1, page 26).
Use this symbol to call up the configuration wizard and edit the system settings
(see Section 7, page 44).
Use this symbol to set various parameters relating to system control (see Sec-
tion 8, page 70).
SMA Solar Technology AG
User Manual