SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso página 31

SMA Solar Technology AG
Display value Description
Reactive power set- Setpoint for the current reactive
point power as a ratio of nominal
power, in %
Energy fed in Grid feed-in: Energy fed into the
hybrid grid in MWh
Operational state Current operating mode of the in-
verter
Device Error Error in the inverter
Procedure:
1. To do this you must be logged in as Installer: Go to the menu Plant Overview via the page and menu selection.
2. Choose Stations > PV System via the page and menu selection.
☑ The designations of all the inverters are displayed in the page and menu selection.
3. Select the desired inverter via the page and menu selection.
User Manual
Value Explanation
– –
– –
STOP The inverter is switched off.
WAIT FOR DC The inverter is waiting for DC in-
put voltage.
WAIT FOR AC The inverter is waiting for an
available local grid at the AC
output.
COM ERROR Communication between inverter
and Fuel Save Controller has
failed.
WAIT FOR SET- The inverter is waiting for a set-
POINT point from the Fuel Save Con-
troller.
IN OPERATION The inverter is feeding in.
WARNING A warning has occurred in the in-
verter.
ERROR An error has occurred in the in-
verter.
– See inverter documentation
6 System Monitoring
FSC20-BA-xx-20 31