Clinician Programmer Management; Adjusting Cp Date And Time; Resetting Clinicuser Password - Boston Scientific Vercise Instrucciones De Uso

Vercise™ Neural Navigator 3 Programming Manual

Clinician Programmer Management

Adjusting CP Date and Time

If the date and/or time are incorrect, select the Adjust Date and Time icon
date and time button to modify the date and/or time as desired and select OK to confirm changes, as shown in Figure 19.

Resetting ClinicUser Password

Update Password
If you know your ClinicUser password and would like to change it to a new password, follow the steps below:
1. Press and hold CTRL + ALT + DEL (control + alt + delete) on the keyboard and select Change a password.
2. Enter your old password in the "Old password" field, and enter your new password in the "New password" and "Confirm password" fields. The ClinicUser
password must be 10 or more characters in length.
3. Ensure your new password is the same in each field. Then press Enter.
Lost/Forgotten Password
If you are unable to log in to the ClinicUser profile on the CP due to a lost or forgotten password, follow the steps below to reset your ClinicUser password:
1. From the CP login screen, select the PasswordReset user profile (Figure 20).
2. Refer to the "Technical Support" section of this manual and call your local Technical Support team. Technical Support will provide you with a password that
will allow you to log in to the PasswordReset user profile.
3. Enter the password provided by Technical Support to log into the PasswordReset user profile.
Vercise™ Neural Navigator 3 Programming Manual
92348958‑06 18 of 477
on the desktop to launch the Date and Time adjustment window. Select the Change
Figure 19. Date and Time Screens
Figure 20. Login Screen with PasswordReset Profile