Memorising / Deleting Remote Controls; Adjusting The Parameters - entrematic Ditec TOP603H Manuale Tecnico

Ocultar thumbs Ver también para Ditec TOP603H:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 196

16. Memorising / Deleting remote controls

16.1 Memorising remote controls via the control panel
1. Press the [7] and [5] keys simultaneously for about 1 s. The display flashes
2. Press the required key on the remote control.
The display indicates
The function of the memorised key is OPEN-STOP-CLOSE-STOP.
NB: with automatic closure enabled (parameter b4), the function of the remote control is OPENING.
16.2 Memorising remote controls from a distance
1.
Press the PRG of a previously memorised GOL4 transmitter for 5 seconds
(within the range of the receiver) until the LED lights up.
2.
Press any one of the CH keys of the new transmitter.
The new transmitter can memorise the same keys as the existing trans-
mitter.
NB: be careful not to accidentally memorise your neighbours' transmitters.
16.3 Deleting remote controls
1.
Press the [7] and [5] buttons simultaneously for more than 6 seconds. The display flashes
, first slowly and then more quickly.
All the remote controls are deleted.

17. Adjusting the parameters

1. Press the menu button
or to the last parameter adjusted. The 2-character menu name flashes. For example A ... 0.
2. Select the required parameter using the [7] and/or [5] buttons.
3. Press the menu button
parameter. For example, 0.
4. Alter the value using the [7] and/or [5] buttons. The new value is automatically memorised.
5. Press the
[6] button for less than 1.5 s. The display returns to the selected parameter.
To quit the adjustment mode, press the
The adjustment mode is automatically quit after 15 s of inactivity.
NB: while the adjustment mode is active, the automation cannot accept any commands.
WARNING: if the programming menu values from A0 to A4 are modified, the display visualises
L .. 4 and you must repeat the learning procedure (see chapter 15).
for about 1 s, and the remote control is memorised.
[6] for more than 1.5 s. The display goes to the adjustments menu
[6] for less than 1.5 s. The display indicates the value of the selected
[6] button for more than 1.5 s.
77
.
PRG

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ditec top903h

Tabla de contenido