Jungheinrich EKS 314 Manual De Instrucciones página 16

12. The manufacturer declines all responsibility for the consequences of dismantling
the truck or making any modification which is outside the manufacturer's control
13. The manufacturer's responsibility is limited to the configuration of the equipment
described in the conformance certificate. The manufacturer is absolved from
their responsibility if there are modifications, additions or use of equipment from
another supplier, in which case the user assumes the manufacturer's responsibi-
lity
14. These operating instructions become invalid if the machine is modified by a com-
pany which is not part of our company group, even if original spare parts are
used and our company logo remains displayed on the equipment
15. The conditions of your workplace, and other unusual operating conditions may
require additional safety precautions and special operating instructions
16. Supervision is an essential element in the safe operation of powered industrial
trucks
17. Batteries must comply with the minimum/maximum battery weight range shown
on the truck identification plate
18. Floor and wheel locks (if provided) are intended only to hold the truck in a desi-
red position on a level surface
Qw W
Serious hazards are overloading, load instability, obstruction to the free
passage of the load, collision with objects or pedestrians, poor maintenance,
and use of equipment for purposes it was not intended or designed. Changes
in load(s), dimension(s), coupling types(s) and/or position(s), and floor
surface condition(s) or battery weights may affect rated capacities and safe
operation. Only stable or safely arranged loads shall be handled.
The operator is responsible for proper loading, load stability and securement. The
operator shall, as necessary, verify that the load remains stable and secure.
C 5