Order Picking And Stacking - Jungheinrich EKS 314 Manual De Instrucciones

3.7

Order picking and stacking

Collecting, transporting and depositing loads
IMPORTANT Before picking up a load unit the driver must make sure that it has been
correctly palletized and does not exceed the truck's capacity. Observe the
load diagram.
– Check the fork distance for the pallet and adjust if necessary.
t
Adjusting the forks
To pick up the load securely, the forks must be as far apart as possible and centrally
positioned with respect to the fork carriage. The load center of gravity must be cen-
trally aligned between the forks.
– Raise the forks (45) slightly
– Push the forks (45) into the correct position on the fork carriage.
.
E 20
45