Charge The Battery - Jungheinrich EKS 314 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3

Charge the battery

Qw W
Park the truck securely
(see section "Parking the Truck Securely" in Chapter E).
– Turn key switch (2) to "0" (zero).
– Lift up the battery panel (4).
Qw W
Only connect and disconnect the battery connector and the socket when the
mains and charger are switched off.
– Remove the battery connector (5).
– If necessary, remove the insulating mat from the battery.
Qw W
When charging, the tops of the battery cells must be exposed to provide
sufficient ventilation. Do not place any metal objects on the battery. Before
charging, check all cables and plug connections for visible signs of damage.
– Connect the charger lead of the battery charger station with the battery connector.
– Switch on the charger.
– Charge the battery in accordance with the battery and charging station manufactur-
ers' instructions.
Qw W
It is essential to follow the safety regulations of the battery and charger station
manufacturers.
4
5
3
1
2
3
F 3

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido