General Information - Gima CMS8000 Manual Del Uso

7

1.1 General Information

Environment:
Temperature
Working
Transport and Storage
Humidity
Working
Transport and Storage
Barometric
Working
Transport and Storage
Power Supply
General instruction:
The monitor has abundant monitoring functions and is used for the clinical monitoring of adult, pediatric and
neonate (SpO function is inapplicable on neonate in American). In addition, the user may select the different
2
parameter configuration according to different requirements.
The monitor can be connected to the central monitoring system via our network so as to form a network
monitoring system.
This machine can monitor vital signals as ECG, Respiratory Rate, SpO
IBP,CO2. It integrates parameter measuring modules, display and recorder in one device, featuring in
compactness, lightweight and portability. Replaceable built-in battery facilitates transportation of patient.
Large high-resolution display provides clear view of 8 waveforms and full monitoring parameters.
The POWER switch is on the front panel. The POWER switch lights when the device is powered on.
The ALARM indicator is on the front panel. The ALARM indicator flashes or lights when alarm occurs.
The sockets of the sensors are at the left side. The recorder socket is at the right side. Other sockets
and power plug-in are at the rear panel.
This monitor is a user-friendly device with operations conducted by a few buttons and a rotary knob
on the front panel. Refer to 1.3 Button Functions for details.
The Monitor performs monitoring of:
ECG Heart Rate (HR)
2-channel ECG waveforms
Arrhythmia and S-T segment analysis(optional)
RESP Respiratory Rate (RR)
Respiration Waveform
SpO Oxygen Saturation (SpO
2
SpO
NIBP Systolic Pressure (SYS),
Diastolic Pressure (DIA),
Mean Pressure (MEAN)
TEMP Channel-1 Temperature (T1), Channel-2 Temperature (T2),
Temperature Difference between two channels (TD)
IBP Channel-1 SYS, DIA, MAP
Channel-2 SYS, DIA, MAP
Dual-IBP waveforms
CO2 End Tidal CO2 EtCO2
Inspried Minimum CO2 (InsCO2)
Air Way Respriation Rate (AwRR)
The monitor provides extensive functions as visual & audible alarm, storage and report printout for trend
data, NIBP measurements, and alarm events, oxyCRG, ViewBed,and drug dose calculation function
is provided too.
+5°C ~ +40°C
-40°C ~ +55°C
30% ~ 75%
≤ 95 %(no coagulate)
700hPa ~ 1060hPa
500hPa ~ 1060hPa
100-240V~ 50/60Hz
Pmax = 150VA
FUSE T1.6AL250V
2
Plethysmogram
2
), Pulse Rate (PR)
, NIBP, and Dual-TEMP, Dual-
2