Drug Calculation - Gima CMS8000 Manual Del Uso

10. Unmount SD card
Enter "SD OPERATE" menu, press "UMOUNT DEVICE". You can take out SD card only when the window
displays the prompt "unmount SD card successfully,you can take out the card now."
Figure 7-18 SD OPERATE
Chapter 8
druG CAlCulAtIon And tItrAtIon tABle
This Portable Patient Monitor provides Drug calculation and titration table display functions for fifteen drugs
and outputs the content of titration table on the recorder.

8.1 drug Calculation

The drug calculations that can be performed by the system are AMINOPHYLLINE, DOBUTAMINE,
DOPAMINE, EPINEPHRINE, HEPARIN, ISUPREL, LIDOCAINE, NIPRIDE, NITROGLYCERIN and PITOCIN.
Besides DRUG A, DRUG B, DRUG C, DRUG D and DRUG E are also provided to flexibly replace any
of the drugs.
Select "DRUG CALC" in SYSTEM MENU, the following "DRUG CALC" display appears:
Figure 8-1 Drug CALC
The following formulas are applied for dose calculation:
Concentrat = Amount / Volume
INF Rate = DOSE/Concentrat
Duration = Amount / Dose
Dose = Rate × Concentrat
Operating method:
In the Drug Calculation window, the operator should first select the name of the drug to be calculated, and
then confirm the patient weight. Afterwards, the operator should also enter other known values.
Turn the knob to select the value of the item to be calculated. Turn the knob to change the value. When it is
the required value, press the knob to view the calculation result. Each item has its calculation range. If the
result exceeds the range, display "---.--"
44