Patient Information Setup; Default Setup - Gima CMS8000 Manual Del Uso

15

3.1 Patient Information Setup

Pick the [PAT SETUP] item in the "SYSTEM MENU" to call up the following menu.
Figure 3-2 Patient Setup
You can setup following patient information:
DEPT. Department in which the patient receives treatment.
PAT NO. Patient No.
BED NO. Patient bed number (Range: 1-100)
DOCTOR Name of the doctor.
NAME Patient name (Valid characters: A-Z, 0-9 and space bar; Max. length: 12 characters)
SEX Patient gender (Available options: "F" for Female, "M" for Male)
PAT TYPE Patient type (Available options: ADU, PED, and NEO)
ADMIT Hospitalization starting date (format: year\month\ day)
BIRTH Patient date of birth (format: year\month\day)
HEIGHT. Patient height (turning the knob with the increase/decrease of 0.5 cm/inch each time)
(cm/inch) The other HT. unit in the other menus accord with the unit which you choosed here.
WEIGHT. Patient weight (turning the knob with the increase/decrease of 0.5 kg/Ib each time)
(kg/Ib) The other WT. unit in the other menus accord with the unit which you choosed here.
BLOOD Patient blood type (Pick A, B, O, AB, or N. "N" represents unknown blood type)
SAVE To change the patient's information you must click this button to save.
DELETE To initialize the Patient Setup menu.
Also in this menu, you may select the [DELETE] item to access the "CONFIRM TO DELETE" dialog box as
show bellow, in which you can decide whether to clear current patient information.
Figure 3-3 Confirm to Delete
Pick [YES] to initialize the previous menu and exit the menu.
Pick [NO] to give up updating the patient and the system will keep the information of the currently patient
and exit the menu.

3.2 default Setup

Note
After selecting any item in this sub-menu, the selected item will replace the current setup of the system and
accordingly become the system default configuration.