Gima CMS8000 Manual Del Uso página 160

40
Figure 7-8 SD Card Operate
Note
If information "SD device wasn't found,please enter SD card" will prompts, you should exit "SD CARD
OPERATE"menu, check if SD CARD or USB interface is normal. If condition still exists, reboot the monitor.
Figure 7-9 SD Card Operate
3. Mount SD CARD
If the monitor has found SD CARD,press"MOUNT DEVICE",the system will display SD CARD state that if the
SD CARD has been mounted successfully.
Figure 7-10 SD Card Operate
Note
You can review trend or ECG waveform when SD CARD has been mounted successfully for 90 seconds .
Otherwise the two button "REVIEW TREND" and "REVIEW ECGWAVE" are invalid.
4. Review trend
Select "REVIEW TREND" in SD OPERATE menu to call up the following menu. In this menu, you can select
which patient you want to review.