Hydraulic System Fluid; Multi-Purpose Grease; Filters - Kalmar THE OTTAWA T2 Manual Del Operador

56
The following are other common names used for DEF:
Urea
AUS 32 (Aqueous Urea Solution 32)
AdBlue
NOx Reduction Agent
Catalyst Solution
Regardless of what the Diesel Exhaust Fluid is called, the
Diesel Exhaust Fluid must meet the engine manufacturer's
specification. See your engine operator's manual.

Hydraulic System Fluid

Proper fluid level can be checked using the gauge found on
the outside of the hydraulic tank. Add fluid to keep it level with
the "Full Cold" line. The level should be checked after moving
the boom to the DOWN position with the engine running.
Three systems requiring hydraulic fluid operate out of a single,
high-capacity reservoir located on the frame rail. The three
systems are:
1. Boom lift
2. Power steering
3. Cab tilt
®
Dexron III should be used whenever replenishing or replacing
the fluid.
NOTICE
The fluid in the hydraulic system and the filter must both be
replaced at least once a year at the very minimum. Never
exceed this interval.

Multi-Purpose Grease

The following lubricants are recommended:
1. API Grade 1 Multi-Purpose Grease
2. Any high quality lithium-based grease that has extreme
pressure properties, is water resistant and is recommended
for use in automotive and heavy-duty applications.
3. Base Oil Timken 40 rating minimum

Filters

Refer to your Kalmar Parts Manual for the required part
numbers. Remember, your parts manual is custom built to
match your specific vehicle. If you are in doubt of the correct
part numbers, contact your Kalmar dealer for help.
See the Preventative Maintenance Form (on pages 50 and 51)
for the recommended MAXIMUM filter replacement intervals.
6 Scheduled Maintenance