Web Interface With Raspberry Pi - Festo MPS 400 Serie Instrucciones De Utilizacion

9.8 Web interface with Raspberry Pi

The station contains a Raspberry Pi as well as a touch monitor to show the measurement data which are
displayed on a website.
The website is hosted on the MES PC and can be accessed at:
172.21.0.90:18812/ui
or
mes-pc.festo.systems:18812/ui
The IP address of the Raspberry Pi device is 172.21.55.23. The device must be connected to the MES PC in
order to display the web interface.
Description of web interface
1 Height measurement determined by the station. This is transferred back to the MES.
2 Target or limit values for the height transmitted by the MES.
3 Current measurement value of the "Tactile measurement" module. This is also displayed in the diagram below it.
4 Current measurement value of the "Scales" module. This is also displayed in the diagram below it.
5 Weight determined by the station. This is transferred to the MES.
6 Target or limit values for the weight transmitted by the MES.
7 Graphical representation of the upper limit value.
8 Graphical representation of the lower limit value.
9 Status information on the measurement procedures.
10 Graphical representation of the lower limit value.
11 Graphical representation of the upper limit value.
© Festo Didactic 8136944
Measuring Pro Station – Operating instructions
35