Connecting Ethercat Interface - Festo 8108002 Instrucciones De Utilizacion

KUKA training cell for hands-on education in robotics – Application Kit
9.1.4 Connecting EtherCAT
1. Mount retaining foot
3. Connect supply voltage.
5. Lay connector cables and connect to EduTrainer
60
®
interface
Risk of death due to electric shock!
Switch off the operating voltage before connecting or disconnecting electrical
connections. The electrical connection is only allowed to be made by a qualified
electrician.
®
2. Connect SysLink connector cables (left: B / right: A)
4. Connect EtherCAT ® connector cable to X65
DANGER
© Festo Didactic 8109530