General Information; Intended Use; Non-Intended Use; Operating Principle And Description Of The Machine - Hettich BlueMax Mini Modular Instrucciones De Servicio

1. General information

This operating manual must be kept at the machine all
the time and be constantly available there. To ensure safe
operation and proper machine handling, it is important for
you to have read and understood the operating manual
and, in particular, the safety rules. The safety provisions and
operating instructions described in this operating manual
must be followed exactly.
Regularly check this machine's safety guards and work
sequences.
Danger!
Any person given the task of installing, servicing,
starting, operating or repairing the machine must
have read and, in particular, understood these
instructions.

2. Intended use

This machine must only be used for working on flat
panels made of wood-based materials, such as chipboard,
blockboard panels, MDF, solid wood or similar materials!
Misuse
No unauthorised alterations must be made to the machine
by fitting it with safety-related add-on devices or equipment
not made by the manufacturer.
Using this machine for any other or similar purpose or
purpose beyond the one stated above is deemed to be non-
intended use and not permitted.
Paul Hettich GmbH & Co. KG shall not be liable for any
damage this causes.

3. Non-intended use

If the machine is used for any non-intended purpose, treated
improperly or operated by untrained or unauthorised persons,
it may present a risk of injury to personnel and a risk of
damage to the machine itself. For this reason, only trained,
instructed and authorised persons must be allowed to
operate this machine.
Non-intended machine use means, for example:
• improperly assembling, starting, operating and servicing
this machine,
• operating the machine with faulty safety guards,
• operating the machine with improperly fitted safety
guards,
• operating the machine with non-functioning safety guards
and protective equipment,
• failing to observe the information and instructions given
in the operating manual in relation to handling, storing,
assembling, starting, operating, servicing and setting up
this machine,
• unauthorised structural changes,
• unauthorised changes to this machine's drive system
(power output, speed),
• inadequate monitoring of machine parts subject to
particular wear,
• improperly performed repairs and
• disasters caused by the impact of foreign objects and Acts
of God.

4. Operating principle and description of the machine

Operating principle

This machine operates semi-automatically All parts being
worked on are fed into the machine by hand.
Flat panels made of wood-based materials, such as
chipboard, blockboard panels, MDF and solid wood are
laid on the work table fixed in place with the clamping
equipment. The drilling process is initiated by pressing the
start button. The start button must remain pressed until the
drilling process has been completed. Using the integrated
insertion facility, the fittings are pressed into place by means
of a manually operated lever. This concludes the machining
process.

5. Rating plate

Note!
The rating plate is located on the machine.

6. Limit values

The following limit values apply to items of equipment
and accessories, such as drive motors, electric / electronic
operating equipment etc.:
• ambient temperature: 35 °C max.
• rel. air humidity: approx. 65 %
en
111 111