Machine Versions Supplied; Machine With Article Number: 9 132; Optional Accessoriesr; Interchangeable Drilling Units - Hettich BlueMax Mini Modular Instrucciones De Servicio

4. Machine versions supplied

The machine comes in various versions.
1. Machine with article numbers:
Compact automatic drilling and insertion machine with
interchangeable drilling unit
• Pneumatic stroke movement, adjustable machine bench
• Mechanical drilling stroke limiter
• 2 drum stops for 22, 37, 57 mm depth adjustment of the
fence
• 1 interchangeable drilling unit with 6 spindles and
quick-change chuck
• 6 drill holders for quick-change chuck
• 1 tool shelf
• 2 pendulum stops
Electrical equipment:
• 1.1 kW / 400 V / 50 Hz / 3 phases
• 1.6 kW / 230 V / 60 Hz / 1 phase
2. Machine with article number:
Compact automatic drilling and insertion machine with
interchangeable drilling unit
• Pneumatic stroke movement
• Adjustable machine bench
• Mechanical drilling stroke limiter
• 2 drum stops for 22, 37, 57 mm depth adjustment
of the fence
• 1 interchangeable drilling unit, 6 spindles and
quick-change chuck
• 6 drill holders for quick-change chuck
• 1 tool shelf
• 2 hold-down clamps (left / right)
• 1 centre stop with scale
• 2 pendulum stops
Electrical equipment:
• 1.1 kW / 400 V / 50 Hz / 3 phases

5. Optional accessories

Accessories for customising the BlueMax Mini Modular
• Hold-down clamp
• Centre stop with scale
• Press-in frame for drilling unit
• Foot switch
• Chuck plug for quick-change chuck
• Chuck plug

6. Interchangeable drilling units

9 131 498
and 9 131 499
9 131 498
9 131 499 1
9 132 099

7. Installing, assembling and connecting

9 131 508 1 set
9 132 098 1 each
9 132 100 1 each
9 132 101 1 each
0 040 657 1 each
0 076 497 1 each

Interchangeable drilling unit, 9 spindles /

Interchangeable drilling unit, 3 spindles, Selekta /

Interchangeable drilling unit, 6 spindles
Interchangeable drilling unit with three drilling spindles for
drilling holes for Selekta hinges (23/9).
Interchangeable drilling unit with 6 drilling spindles for
drilling holes for hinges and connecting fittings
• Interchangeable drilling unit, 3 spindles,
Selekta drilling pattern
• Interchangeable drilling unit, 6 spindles 9 131 501 1 each
• Interchangeable drilling unit, 6 spindles,
with quick-change chuck and
drill holders

Interchangeable drilling unit, 9 spindles

Interchangeable drilling unit for System 32 hole line drillings
• Interchangeable drilling unit, 9 spindles 9 131 506 1 each

• Interchangeable drilling unit, 9 spindles,

with quick-change chuck and
drill holders
Interchangeable drilling unit, 90°, 9 spindles
Interchangeable drilling unit, offset 90° for drilling holes
for runners in System 32
• Interchangeable drilling unit, 90°,
9 spindles,
• Interchangeable drilling unit, 90°, 9 spindles,
with quick-change chuck and
drill holders
The BlueMax Mini Modular comes in secure shipment
packaging for safe transportation. A number of components
must be installed to make the machine ready for operation.
After installing the machine, clean off shipping dust and
remove preservatives (oil).
The following pages explain how to put together and install
individual assemblies.
Depending on your machine's equipment, specific skills are
required to carry out this work properly.
9 131 503 1 each
9 131 500 1 each
en
9 131 505 1 each
9 132 097 1 each
9 131 507 1 each
121