Limiting Drilling Stroke For Drilling Hole Lines - Hettich BlueMax Mini Modular Instrucciones De Servicio

Limiting drilling stroke for drilling hole lines

To work more effectively, the drilling stroke can be shortened
for drilling hole lines.
For production, turn stop using
1
lever .
2
Interchangeable drilling unit
Hold down switch for initiating drilling stroke.
A short stroke is carried out for the next work cycle.
Danger!
Exercise care when the drilling unit moves up
and down, you could trap your fingers here.
Move stop back after completing the work operation.
1
The lever is next to the drilling unit.
Note!
Check all settings once you have finished making
them.
must be in the lower position.
3
2
1
1 3
141
en