Pendulum Stops - Hettich BlueMax Mini Modular Instrucciones De Servicio

Setting up
Setting with the drum stops
The drum stops provide set spacings.
Preset: 22 mm, 37 mm and 57 mm.
Pull bench back a short distance.
For setting, turn the drum stop
and engage.
Space 22 mm
Space 37 mm
Space 57 mm
en
Note!
This setting must be made on both sides
of the machine!
Move bench against stops
Carry out trial drilling.

Pendulum stops

Adjust pendulum stops to suit application.
To make adjustments, undo screw
pendulum stop along rail.
5
Re-tighten screw.
144
to the required position
2
Interchangeable drilling unit,
6 spindles for drilling hinge hole
Interchangeable drilling unit,
9 spindles for drilling hole line
Interchangeable drilling unit,
9 spindles for drilling hole line
and re-tighten screws in bench.
1
and move
4
1
4 5
2