Changing Interchangeable Drilling Units; Cleaning - Hettich BlueMax Mini Modular Instrucciones De Servicio

6. Changing interchangeable drilling units

Depending on application, the appropriate
interchangeable drilling unit must be fitted for drilling
the required holes.
We will now show you how to change a drilling unit on
the basis of this example. When changing drilling units,
we recommend wearing safety gloves to prevent injuring
yourself on the sharp tools.
Warning!
When changing tools, always detach the
compressed-air hose and disconnect from
the power supply (unplug mains plug).
First undo star shaped grips
U-shaped safety element
drilling unit to prevent it from dropping down.
3
Lower interchangeable drilling unit out of guide using
grip , While doing so, give safety catch
4
downward turn.
Set the interchangeable drilling unit aside.

Cleaning

Before fitting the interchangeable drilling unit you
require, clean mating faces
with a clean cloth.
Note!
Soiling results in rapid drive-component wear and
leads to malfunctions in the production process.
until tool slips down.
1
holds back interchangeable
2
a short
2
and drive sprocket
5 6
1
2
4
5
6
1 3
en
137