Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Technical information
5. Technical information
1. Safety precautions
2. Attachment points
en
112
112
1. Safety precautions
Observe the regulations, warnings and provisions on health,
safety and environmental protection for all of the work
112
described in this section.
112
2. Attachment points
113
Only use suitable and approved lifting gear (crane) for
unloading the machine, assemblies and components as well
114
as for lifting heavy loads; only use appropriate means of
115
transport for handling the machine internally.
116
Any unloading or internal transportation must not be done
by hand if such involves weights in excess of 25 kg.
116
When using industrial trucks to unload the machine and
116
move it internally, always take into account the machine's
116
total permissible weight (see Technical specifications).
116
Danger!
116
Never stand or work under loads suspended on lifting
gear. This presents the risk of fatal injury!
116
Observe the following when using lifting gear:
116
• Only attach lifting gear at the points marked (lifting
117
eyebolts etc.) on the machine / assemblies / components.
117
• Only use appropriate and tested load suspension devices
117
(lifting belts, ropes, chains, shackles etc.) with a sufficient
load carrying capacity.
117
• Only give experienced, skilled personnel the task of
117
attaching the machine / assemblies / components.
118
• Always ensure level standing for machine / assemblies, lift
vertically, never drag at an angle.
118
Protect projecting machine parts and equipment from
118
damage when using lifting gear and moving the machine
118
internally.
118
Set down loads gently with the usual care and take
immediate action to prevent them from falling over /
tipping, rolling away, suffering damage from external force,
e.g. colliding with industrial trucks and objects falling from
above.
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
