Nogueira FTN-1900 Manual De Instrucciones página 174

4. Preparation
that the aligners are different, have an
inclination to the side, one being 'right'
and the other 'left'. The figure on the side
shows the mounting side of the aligners.
Be careful not to mount them in the
inverted position.
Fix the aligner (H) on the head, using the
5.
bolt and nut (K);
K= Hex bolt M8 x 45 mm (01 pc)
K= Lock Nut M8 (01pc)
Fix the aligner (J) on the other side of the
6.
head, using the bolt and nut (K);
Place the two supports (L), fixing them
7.
with the bolts, washers and nuts (M);
K= Hex bolt M8 x 45 mm (01 pc)
K= Lock Nut M8 (01pc)
34
H
K
Instructions Manual
K
J
J
H