Nogueira FTN-1900 Manual De Instrucciones página 261

6.16.9- Gearbox (D)
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Recommended oil: 150/CLP.
Viscosity: ISO 150.
Specification: DIN 51517/3.
Oil Capacity
(D) PTO Gearbox: 2.3 liters.
Checking the oil level:
Wipe around the level plug on the gearbox.
Loosen the level plug and check that the oil
reaches the hole in the plug;
If necessary, add lubricating oil until it begins
to seep through the hole in the level plug.
Oil Change:
First exchange: after a week or 50 hours of
work, whichever comes first.
Other changes: every year or 500 hours of
work, whichever occurs first.
Procedure for oil changing:
Place the machine on a flat and level place;
1.
Put an appropriate recipient under the
2.
drain plug so that the dripped oil from
the gearboxes is collected;
Remove the fill plug, drain plug and allow
3.
the oil to drain completely;
Replace the drain plug;
4.
Fill with the recommended oil;
5.
Replace the breather.
6.
SUPPLY
DRAIN
Instructions Manual
6. Maintenance
D
LEVEL
121