Nogueira FTN-1900 Manual De Instrucciones página 185

Place the pin (F), the counter pin (G),
4.
tighten the tensioner (E) and the jam nut
(J). Repeat the procedure on the other
tensioner;
Remove the counter pin and the pin (K);
5.
Move the gearbox (L) to the side;
6.
Secure the gearbox in this position with
7.
the bolt and nut (M);
M= Hex bolt M20 x 50 mm (01 pc)
M= Lock nut M20 (01 pc)
Attach the tensioner (B) in the position
8.
shown in the figure beside;
Couple the cardan (N). Note that the clutch
9.
must be coupled to the PTO gearbox (L).
B
Instructions Manual
4. Preparation
F
E
J
G
A
M
L
K
N
45