Nogueira FTN-1900 Manual De Instrucciones página 193

Lift and lock the two support foot (P).
4.
The coupling arm of the harvester allows the
coupling at different points. Use the position
that best suits your tractor.
After coupling, make sure there is sufficient
clearance between the tractor rear tire and
the machine, as shown in the picture besides.
Using the tractor stabilizers, center the
machine with the tractor and adjust the lateral
clearance. If you have any doubt, consult your
tractor manual.
CAUTION!
• Make sure that the hydraulic arms
are securely attached to the Harvester
before transporting or using it.
• Be sure to place the locking pins (E) on
the 3 coupling pins.
Failure to follow these instructions can
lead to personal injury and property
damage.
P
Instructions Manual
4. Preparation
P
GAP
E
53