1- Mounting The Support Wheel - Nogueira FTN-1900 Manual De Instrucciones

4.2.3- Mounting the support wheel
The support wheel leaves the factory
disassembled from the machine. To assemble
it, observe the following instructions:
Fit the wheel (A) to the hub bolts (B).
1.
Secure the wheel to the hub using the 6
2.
nuts (C);
C= Wheel Nut (9/16 ") 17.58 mm (06 pcs)
Fit the cover (D), pressing it against the
3.
hub.
NOTE!
Check and calibrate the tire regularly.
See item 6.14 - "TIRE CALIBRATION".
The function of the support wheel is
to assist the tractor's hydraulic system
to support the weight of the machine.
A
C
D
Instructions Manual
4. Preparation
B
43