Nogueira FTN-1900 Manual De Instrucciones página 242

6. Maintenance
6.7- Synchronizing the rotors
The Harvester leaves the factory with the
two chopper rotors synchronized, so that
the knives of one do not cut at the same
time as the knives of the other. Maintaining
this regulation is very important, as this
way the harvester will require less power
from the tractor during the chipping.
The couplings (A) keep the rotors
synchronized. If these couplings are
removed, when reassembling them, the
timing indicated below must be checked.

RIGHT SYNCHRONISM
The knives of the two
rotors are interspersed.

WRONG SYNCHRONISM
The knives are aligned
and will cut at the same
time. This will require
more power to chop the
plants, overloading the
machine and the tractor.
102
A
Instructions Manual
A