Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 10

3. A new screen appears with the message: Place 30
pieces. Press ACCEPT.
NOTE: Default is 10 pieces, but message
matches number of pieces in SAMPLES button.
4. After following these instructions, press RETURN TO
APPLICATION on the main edit settings screen.
PARTS COUNTING – FILL
This feature permits establishing a set quantity of
pieces as a reference, so when pieces are added,
their percentage of the reference amount appears. A
Progress bar indicates the percentage.
1. In the upper left portion of the home screen, select
PARTS COUNTING. (The option will appear if it has
been enabled in the application modes menu.)
2. Press the SETUP button
counting setup menu.
3. Change counting mode to fill counting.
4. The default (or last) APW is displayed. Place objects
on the pan to display the fill status.
PAGE 10 OF 96
OPERATION CONTINUED
to enter the
EDIT SETTINGS
Touch the EDIT SETTINGS button. The settings screen
appears.
The buttons for APW, SAMPLES and TARGET show default
(or previously set) values.
1. To change values, touch the button. A keyboard
screen appears.
2. Key in the new value, and press √.
3. To set a new average piece weight, press
RECALCULATE APW.
4. A new screen appears saying: Place reference
weight on the pan. Press ACCEPT to continue.
5. This establishes a new reference weight with a
sample. Alternatively, fill in values in the screens for
APW, samples and target.
6. After following these instructions, and setting all
values as desired, press RETURN TO APPLICATION.
0721 IH-4737