Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 29

6. Continue to enter the required information following
the above procedure:
• Positive Tolerance 1, via the +TOLERANCE 1 button.
• Negative Tolerance 1, via the -TOLERANCE 1 button.
• Positive Tolerance 2, via the +TOLERANCE 2 button.
• Negative Tolerance 2, via the -TOLERANCE 2 button.
NOTE: Tolerances can be in either weight (default)
or percent.
7. When finished, press RETURN TO APPLICATION and the
SQC home screen appears.
BEGIN THE SQC PROCESS
1. Touch the BEGIN NEW BATCH button.
2. First batch: the screen prompts for the batch name.
3. Enter the batch name, then press √.
4. The process screen is then displayed. Follow the
screen instructions, then press ACCEPT to store the
sample weight.
5. The current number of samples, along with the average,
sum, minimum value, maximum value, and range are
displayed.
6. Continue to follow the screen instructions by weighing
samples and pressing ACCEPT to store each sample's
weight. The sample size is 10 (default). It can be
changed in Setup from 2 to 80 pieces.
7. At any time, press END BATCH to see the individual
results screen, showing results for the current batch.
PAGE 29 OF 96
OPERATION CONTINUED
8. Once all the samples have been weighed, the results
9. If the COM interface is enabled, press PRINT to send the
10. Press CLOSE to return to the current batch process.
11. A message offers the chance to save the batch, if
12. To view the process results of this batch (and any other
13. The Batch History screen shows the basic information –
14. Press SELECT to see (and print) the Batch Information
15. Press CLEAR BATCHES to reset SQC results and return
16. Press CLOSE to return to the SQC home screen to
17. To view the process results graphically (batch
18. Press PRINT or CLOSE as shown above.
screen appears automatically.
results either to a computer or a printer.
desired.
saved batch), press the VIEW BATCH HISTORY button.
maximum, minimum, average (mean), and standard
deviation – for all currently saved batches.
screen for any saved batch.
to the SQC home screen
begin another batch or to view process results.
comparison), press the VIEW TRACE button.
0721 IH-4737