Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 18

FREE FORMULATION (DEFAULT)
This mode allows the user to freely add components. A
filler material is asked for at the end.
1. In the upper left portion of the home screen, select
FORMULATION.
2. To start the compounding process, press BEGIN
FORMULATION.
3. A prompt says place component 1 then press
ACCEPT. The item weight is displayed on the main
display line. Place the first ingredient on the pan (or
in a tared container). Press ACCEPT to store the first
component.
4. A prompt says place item 2. Press ACCEPT. Continue
adding components and pressing ACCEPT to store
the weight of the individual components until the
formula is complete.
5. The total line shows the total weight of all the
components. Press PRINT at any time in the process
to print the recipe.
6. Then press END FORMULA. The display may prompt
for a filler material. If the formula calls for a filler
material, press OK.
PAGE 18 OF 96
OPERATION CONTINUED
7. A popup message window appears, prompting
FREE FORMULATION RESULTS
1.
2. Press CLOSE to close the results window and return to
RECIPE FORMULATION
Recipe formulation requires the formula to be entered
first, followed component by component.
1. To enable this feature, press the SETUP icon
2. Change the mode to Recipe Based.
3. Press DONE in the main setup options screen.
4. Press BEGIN FORMULATION.
for the filler material to be added. Add the filler if
needed, then press ACCEPT. (If no filler is needed,
press ACCEPT without adding filler.) The results are
then displayed in a pop-up window.
Press PRINT to send data to the enabled COM port
the application home screen
to enter the formulation setup menu.
0721 IH-4737