Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 24

4. The balance calculates water density based on the
water temperature value entered (look-up table).
5. Measure the actual water temperature using a
precision thermometer.
6. To adjust the water temperature or oil density values,
touch the WATER TEMP or OIL DENSITY button.
7. Numeric input windows appear. Key in the desired
value, then press √.
8. The display returns to the previous screen with the
new value highlighted.
9. To return to the density determination home screen,
touch RETURN TO APPLICATION.
10. Press BEGIN DENSITY CALCULATION.
STEP 1 OF 3 – WEIGH THE UN-OILED SAMPLE IN AIR.
1. Follow the screen instructions then press ACCEPT
to store the dry sample weight ("in air").
STEP 2 OF 3 – WEIGH THE OILED SAMPLE IN AIR.
1. Follow the screen instructions then press ACCEPT
to store the sample weight (oiled).
PAGE 24 OF 96
OPERATION CONTINUED
STEP 3 OF 3 – WEIGH THE OILED SAMPLE SUBMERGED IN
LIQUID.
1.
2. Once the necessary weights have been determined,
3. The value stays on the display until BEGIN DENSITY
4. Press BEGIN DENSITY DETERMINATION to reset all the
The peak hold application allows the user to capture
and store the highest stable or unstable weight in a
series of weight measurements.
Three different start/reset modes can be selected:
• Manual (start and stop the capture via key press)
• Semi-Automatic (start automatically/reset manually)
• Automatic (start and stop the capture automatically)
This application allows both stable and unstable weights
to be captured.
Follow the screen instructions then press ACCEPT to
store the oiled sample weight (submerged in liquid).
the density of the sample is displayed in g/cm
(along with the weight in air, un-oiled and oiled, and
weight in water) on the application screen.
DETERMINATION is touched.
weight values and restart the process.
PEAK HOLD
3
0721 IH-4737