Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 15

4. Place specimen on the pan. The cycle starts
automatically.
5. After the cycle ends, the weight reading is held. Press
the RESET button to clear the reading and return to zero.
DYNAMIC WEIGHING – AUTOMATIC
The cycle begins when an object (animal) is placed on
the pan, and the held value is automatically reset when
the object is removed from the pan (10-second delay).
1. To enable this feature, enter the Dynamic Weighing
setup menu.
2. Press AUTO SAMPLE, and change the mode to
Automatic.
PAGE 15 OF 96
OPERATION CONTINUED
3. The dynamic – automatic screen appears with the
4. After the cycle ends, remove the specimen and the
5. Press the RESET button to clear the reading and return
default (or last) averaging time displayed. Place
objects on the pan to begin. The cycle starts
automatically.
balance returns to the home screen automatically
(after a 10-second delay).
to zero.
0721 IH-4737