Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 26

4. The highest stable weight reading is held until the
weight is removed.
5. The process starts automatically once the weight is
removed from the pan (after 10 second delay).
INGREDIENT COSTING
This application allows the user to determine the cost
of a formula or recipe based on the known cost and
quantity of the components or ingredients. Up to 99
components are allowed.
1. In the upper left portion of the home screen, select
INGREDIENT COSTING. Follow the screen instructions
to begin.
ITEM SETTINGS
1. Press ITEM SETTINGS to set up items in memory.
The Edit Settings Screen
• Settings available: Add New, Edit Name, Edit Cost,
Edit Unit, Delete Item, Clear All
• Functions available: RETURN TO APPLICATION
2. To set up the item(s) in memory, press ADD NEW. A
new item is added (default name) with default info
(cost per weight and weight unit).
3. To change the default item name, Press EDIT NAME.
The alpha-numeric entry screen appears.
4. Enter the new name, then press √. The display
returns to the previous screen with the new value
highlighted momentarily.
5. To change the default component cost per unit,
press EDIT COST. The numeric entry screen appears.
6. Enter the new weight, then press √. The display
returns to the previous screen with the new value
highlighted momentarily.
7. To change the default component unit, press EDIT
UNIT. The Weighting Units screen appears.
8. Continue adding items as required, using ADD NEW.
New items can be added at any time.
9. To delete an item, touch the item to highlighting it,
then press DELETE ITEM.
PAGE 26 OF 96
OPERATION CONTINUED
10. To clear all items, press CLEAR ALL. A confirmation
11. Once setup is complete and the application screen
12. Add the first item then press ACCEPT to store the
13. Continue to follow the screen instructions to add the
14. Press the VIEW DATA button at any time to show the
15. After the last item has been weighted, press VIEW
INGREDIENT COSTING RESULTS
1.
2. Press CLOSE to close the results window and return to
is required. When finished, press RETURN TO
APPLICATION.
is displayed, follow the screen instructions.
value in memory. The weight of the item is recorded,
then the screen prompts for the next component.
Unit Cost, Total Weight and Total Cost are also
displayed.
items to the pan and touch the ACCEPT button until
each item has been weighed.
current results: Item, Item Cost and Item Weight.
DATA to see the results.
NOTE: Cancel the current data set by pressing
CLEAR DATA.
Press PRINT to send the data to the enabled COM
port.
the Application home screen.
0721 IH-4737