Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 14

DYNAMIC WEIGHING – MANUAL (DEFAULT)
1. To set the mode, touch the SETUP wrench. When
you make a selection, the setup options screen
reappears. Press DONE.
2. On the Dynamic Weighing home screen, the default
(or last) averaging time is displayed. Follow the
screen instructions.
3. Place objects on the pan. Press the BEGIN DYNAMIC
button.
4. The balance begins a countdown (averaging
process). During the countdown, the information
line displays the time remaining. If necessary, press
CANCEL to quit and return to the home screen.
PAGE 14 OF 96
OPERATION CONTINUED
5. When the countdown ends, the result is displayed
6. Press RESET to clear the held weight and return to the
DYNAMIC WEIGHING – SEMI-AUTO
The cycle begins when an object (animal) is placed on
the pan, but the held value must be reset manually.
1. To enable this feature, touch the SETUP icon
2. Change the mode to Semi Automatic.
3. The dynamic – semi-automatic screen appears with
and held.
initial screen.
NOTE: Clear the pan before beginning a new
Dynamic Weighing cycle.
in the top-center of the main screen to
enter the Dynamic Weighing setup menu.
the default (or last) averaging time displayed.
0721 IH-4737