Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 9

2. Key in the desired sample size, then press √.
3. The next screen appears, with the message to place
the number of pieces entered in the numeric input
window.
4. Place the indicated number of pieces on the
platform. Then touch either TARE, CANCEL or ACCEPT.
5. Press ACCEPT to capture the value and return to the
settings screen.
6. The settings screen appears with the new APW value
highlighted.
7. To begin counting pieces, touch RETURN TO
APPLICATION.
PARTS COUNTING – CHECK
This feature permits establishing a set quantity of pieces
as criteria for similar items that can be quickly checked
against a sample.
1. Press the SETUP button
counting setup menu.
PAGE 9 OF 96
OPERATION CONTINUED
to enter the
2. Change counting mode to check counting.
3. The default (or last) APW is displayed. Place objects on
the pan to display the check status (number of pieces).
EDIT SETTINGS
To use the parts counting-check mode, the over limit
and under limit values must be set. The APW and
standard sample size can also be set.
1. Touch the EDIT SETTINGS button. The settings screen
appears. The buttons for APW, SAMPLES, OVER LIMIT
and UNDER LIMIT show default (or previously set)
values. To change any value, touch the button. A
keyboard screen appears.
2. To set a new APW, press the RECALCULATE APW button.
0721 IH-4737