STATISTICS
Statistics are used to compare a number of samples
and examine the relative deviation of the samples
along with other statistical data. A minimum of three
samples is required.
LIBRARY
When an item is processed on a regular basis, the item's data may be stored in memory for future use. This memory is
referred to as the balance's library.
The following data is stored for the application used:
Parameters
Application
and setups
Weighing
Counting
Percent
Weighing
Check
Weighing
Dynamic
Weighing
Filling
Totalization
N/A
Formulation
N/A
Differential
N/A
Weighing
Density
Determination
Peak Hold
N/A
Ingredient
N/A
Costing
Pipette
Adjustment
SQC
CREATING A LIBRARY RECORD
1.
To create a library record, the settings screen is used.
From the home screen, touch the EDIT SETTINGS button.
The settings screen is now displayed.
2. Touch the EDIT SETTINGS button.
3. The Settings screen appears. Confirm the
application settings; then touch SAVE icon.
4. An alpha-numeric entry screen appears, to enter
the library record name.
5. Load a library record from the home screen.
6. Enter the record name, then press √.
NOTE: Library record names can be 8
characters or less.
PAGE 30 OF 96
OPERATION CONTINUED
Preset
Name
Tare
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
N/A
N/A
N/A
N/A
N/A
N/A
x
x
x
N/A
N/A
N/A
N/A
x
x
x
x
x
x
Statistics can operate manually (key press after each
step) or automatically (weights automatically recorded
when stable). To use the statistics feature, enable it in
the application setup menu.
This feature is available in weighing, counting, check
weighing, dynamic weighing and filling applications.
Ref Wt. or
Sample
APW
Target
size
x
x
x
x
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
7. A Record is saved message appears. Press OK, then
press RETURN TO APPLICATION.
Under
Over Limit
Level
Limit
x
x
x
x
x
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Mode
x
x
x
N/A
N/A
N/A
N/A
N/A
0721 IH-4737