Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 4

ENABLING UNITS OF MEASURE
In the balance setup menu, enter the weighing units sub
menu to activate the desired units of measure.
NOTE: Due to national laws, the indicator may
not include some of the units of measure listed.
Milligram
Carat
Pound
Newton
Tael (HK)
Tical
Custom Unit 1
TURNING A UNIT ON/OFF
1. Select the desired unit, then touch the item to toggle
it either on or off
2. The current menu item status is shown:
OFF = disabled
ON = enabled
PAGE 4 OF 96
OPERATION CONTINUED
Gram Kilogram
Ounce Ounce Troy
Pennyweight Grain
Momme Mesgal
Tael (SG) Tael (TW)
Tola Baht
Custom Unit 2 Custom Unit 3
CUSTOM UNITS
Use each custom unit to display weight in an alternative
unit of measure. The custom unit is defined using a
conversion factor, where the conversion factor is the
number of custom units per kilogram expressed in
scientific notation (Factor x 10^Exponent).
For example: To display weight in troy ounces (32.15075
troy ounces per kilogram) enter a factor of 0.321508
and an exponent of 2.
Set the status:
OFF = disabled
ON = enabled
When custom unit is set ON, the factor, exponent and
least significant digit must be set.
FACTOR
Set the conversion factor using the numeric keypad:
Settings of 0.00001 to 1.9999999 are available. The
default setting is 1.000000.
EXPONENT
Set the factor multiplier:
0 = multiply the factor by 1 (1 x 10
1 = multiply the factor by 10 (1 x 10
2 = multiply the factor by 100 (1 x 10
3 = multiply the factor by 1000 (1 x 10
-1 = divide the factor by 10 (1 x 10
-2 = divide the factor by 100 (1 x 10
-3 = divide the factor by 1000 (1 x 10
LEAST SIGNIFICANT DIGIT
Set the graduation:
Settings of 0.00001, 0.00002, 0.00005, 0.0001, 0.0002,
0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5,
1, 2, 5, 10, 20, 50, 100, 200, 500 and 1000 are available.
NOTE: Least significant digit setting selections
are dependent on the factor and exponent
settings. Selections are limited.
)
0
)
1
)
2
)
3
)
-1
)
-2
)
-3
0721 IH-4737